+49 (0) 8165 9999 300

Chemical Industry

Process meters

Chemical Industry

The pressing needs for measurement technology of flowing liquids and gases in the chemical industry are met by TrigasDM with a selection of sensors that offer not only material compatibility of sensors and seals, but some instruments also include fast and dependable process control.

Whether it is measuring and dosing of additives, alcohols, demineralized water or cleaning liquids, controlling reactions or bi-directional measurements for monitoring valves and other components, TrigasDM offers you high-quality solutions for laboratory and process.

Our focus is on measuring and dosing of small amounts of liquids of varying viscosities, conductivities and other important properties.

We measure and regulate gases accurately, quickly and reliably with our Alicat mass flow meters and controllers, which measure mass and volumetric flow, pressure and temperature, all in one instrument.

The fast response time of 10 ms or less makes them ideal for controlling high-precision dosing and leakage applications.

In cooperation with our sister company TrigasFI we offer the calibration of all flow sensors up to 5000 l/min for liquids and 20000 Nl/min for gases, on request also with DAkkS ISO 17025 certificate.

Our new DAkkS accreditation expansion which now includes on-site calibrations even enables us to perform these services in-house at our customers’ locations.

We recommend the following products:

TrigasDM Turbine Flowmeters are the ideal solution for liquid measurement applications requiring high accuracy, very fast response times and compact design. They provide a perfect reliability in continuous operation, also at constant flow changes and fluctuating operating temperatures. They are not sensitive to vibration, shock and humidity.

Alicat units allow you to measure mass flow, volumetric flow, pressure and temperature simultaneously. If you choose the units with the integrated valves, you can also control flow or pressure with the same device. Choose one of up to 130 gas calibration curves which are already pre-installed or define your own gas mix using COMPOSER™ software. If you change the gas or gas components you will immediately measure with the same accuracy, without applying average factors or sending the device for a new calibration.

RF Pickoffs with MS Connector based on the principle of modulated carrier frequency. As there are no magnetic forces involved the rotor is allowed to move freely at lower flow rates.

The TriLIN LNA Series Linearizer/Flow Computer amplifies, linearizes, and scales the frequency signals of Turbine flow meters.

Read our application reports:

Bioprocesses fully under control with Alicat BIO-MFC

Bioreactions revolutionize production processes. The new requirements for materials and functionality of the measuring and control technology has been addressed by Alicat with the new BIO-MFC.

Hot, dirty, wet - a challenge for any flowmeter. Here comes the solution for your difficult applications!

No other flow meter measures as well under such harsh conditions and helps you to save cost and maintenance, as the new K-BAR 2000B-WGF…

Equipment for painting robots

Sprayer and painting robots are used for the automatic surface coating of various components. High demands are placed on the dosing unit. It must be compact, accurate, cleanable, vibration resistant… Here comes the tailor made solution from OVAL!

Fibers - as thin as a human Hair

Precision is to hit the same point on the target every time. Repeatability is the ability to demonstrate the same precision every time you go to the line and shoot. What does this mean for the glass fiber industry? click here

The no-pressure loss flowmeter fallacy

In the thermodynamic design of vehicles, precise measurement of the cooling water flow is critical, but at the same time the influence of the flowmeter on the cooling circuit must be close to negligible. Suitable measurement systems are required…

Pressure Control Loop feature of Alicat to control closed Pressure Systems

What is the Pressure Control Loop feature? Read about some interesting applications where this feature can perfectly support you.

High accurate Control of Gas Mixtures with special Control Loop Option

How can we reach a high accuracy at the measurement of a gas mixture, if the content of the mixture is constantly changing and there is no real gas available for calibration? Read about interesting applications for this feature.

Get in touch with us. We are looking forward to hearing from you.