+49 (0) 8165 9999 300

AVIATION
AEROSPACE

Aerospace Industry

Reliability and safety are of great importance in the aerospace industry. In addition, criteria like robustness of sensors and other components, vibration resistance, but also temperature resistance and resilience to quick temperature changes are important.

 At Trigas, these requirements are well understood and implemented into the latest product developments and solutions.

That is why almost all major European airlines have their flowmeters calibrated and sometimes even the blades and vanes of their jet engines air tested at the TrigasFI laboratories. In cases of particularly important equipment that is permanently in use and cannot be removed to be sent out for calibration, TrigasFI technicians regularly visit aerospace customers to perform on-site calibrations.

Test mission-critical aerospace components benefit from Alicat gas pressure regulators that can control pressures up to 200 bar.

Carry out aerodynamic tests of aircraft models or check the quality of pilot masks in the cockpit with the bi-directional mass flow meter from Alicat, which can simulate the breathing of pilots with its particularly low pressure drop.

Durchflussmesser Flüssigkeiten Lösung

Our turbine flowmeters offer all the important features which are required for exact measurements of liquids in the air and on the ground.

They are small and light (they weigh only a few grams), at the same time offering high accuracy and reliability. Temperature fluctuations and corresponding viscosity changes of fuel and other critical fluids are monitored and compensation is applied through proprietary algorithms and special multi-viscosity calibration methods.

TrigasDM turbine flowmeters are the ideal solution for many more applications at airports and space stations, like in the measurement of liquids of spacesuits, fuel supply to missiles or the monitoring of drinking water or coolant consumption for on-board experiments.

With the special CVF air flow test equipment, Trigas offers a turbine blade testing solution developed to the highest European and international quality standards. Constructed and manufactured in Germany and tested in our own ISO17025 certified test laboratory, the CVF system offers a flexible system that we can adapt and expand according to our customer´s requirements. Thus, we can meet the special test specifications of the various turbine manufacturers, which usually have to be complied with not only by the manufacturers themselves but also by all their suppliers.

And even after delivery, TrigasDM supports its customers on a long-term basis. From our central location near Munich Airport, our service organization guarantees fast response times and high availability. We regularly recalibrate our systems and comparable systems from other manufacturers for our customers onsite. In urgent cases, we can offer also remote maintenance with VPN modem.

Trigas offers not only equipment, but also high-quality regular maintenance and if required, repair and spare parts. Talk to us about a partnership for peace of mind on your current applications and advice on new ones!

We recommend the following products:

TrigasDM Turbine Flowmeters are the ideal solution for liquid measurement applications requiring high accuracy, very fast response times and compact design. They provide a perfect reliability in continuous operation, also at constant flow changes and fluctuating operating temperatures. They are not sensitive to vibration, shock and humidity.

Alicat units allow you to measure mass flow, volumetric flow, pressure and temperature simultaneously. If you choose the units with the integrated valves, you can also control flow or pressure with the same device. Choose one of up to 130 gas calibration curves which are already pre-installed or define your own gas mix using COMPOSER™ software. If you change the gas or gas components you will immediately measure with the same accuracy, without applying average factors or sending the device for a new calibration.

Low profile Smart Pickoffs, with the flowmeter calibration data stored internally. They allow out turbine flowmeters to be connected to any of our Lysis linearizers offering a true plug & play/measure solution; now also with built-in temperature compensation! Especially recommended for mobile applications.

RF Pickoffs with MS Connector based on the principle of modulated carrier frequency. As there are no magnetic forces involved the rotor is allowed to move freely at lower flow rates.

Lysis an intelligent and compact flow transmitter. It linearizes the output signals of the sensor and compensates in real time viscosity, density and temperature

The TrigasDM Air Flow Test Stand is a Sonic Nozzle (Critical Venturi) based air flow measurement system and the culmination of more than 30 years of continually expanding the state of the art in gas flow measurement precision and reliability.

Read our application reports:

Hot, dirty, wet - a challenge for any flowmeter. Here comes the solution for your difficult applications!

No other flow meter measures as well under such harsh conditions and helps you to save cost and maintenance, as the new K-BAR 2000B-WGF…

Equipment for painting robots

Sprayer and painting robots are used for the automatic surface coating of various components. High demands are placed on the dosing unit. It must be compact, accurate, cleanable, vibration resistant… Here comes the tailor made solution from OVAL!

One Click: Flow to CAN

Technicians have to install many different sensors into test vehicles in a short time. They must take care that they are fully functional and also correctly addressed to ensure the success of the expensive road test…

Pressure Control Loop feature of Alicat to control closed Pressure Systems

What is the Pressure Control Loop feature? Read about some interesting applications where this feature can perfectly support you.

High accurate Control of Gas Mixtures with special Control Loop Option

How can we reach a high accuracy at the measurement of a gas mixture, if the content of the mixture is constantly changing and there is no real gas available for calibration? Read about interesting applications for this feature.

Get in touch with us. We are looking forward to hearing from you.